Ecocondens integra II PLus

 

ECOCONDENS INTEGRA II PLUS is a modern, wall mounted gas condensing boiler with an integrated 48-litre storage tank. Complete heating unit with unique casing; reliable in preparation of hot water thanks to a very efficient storage tank. Very easy access to the compensation vessel for CH and DHW directly after removing the cover. A 48-litre storage tank ensures that hot water is immediately available after turning off the tap. In addition, the high heat output of the coil provides instantaneous water heating in the storage tank.

FREEPHONE: 0800 689 3538

Boiler Overview

  • Easily convertible from COMBI to LPG by simple settings change
  • boiler controllable via smartphone or tablet
  • possibility of connecting the regulator with 0-10 V signal or with Open-Therm communication
  • quiet operation thanks to additional sound insulation
  • reliable hot water production thanks to an integrated 48-litre storage tank,
  • storage tank shell and coil made of INOX stainless steel
  • stainless steel cylindrical burner allows to achieve a very wide range of modulation (from already 13% of maximum power)
  • compact heat exchanger with high efficiency thanks to a single, spirally twisted stainless steel coil with low hydraulic resistance and high stone resistance
  • modern and easy to use control panel with LCD display and full self-diagnosis
  • adaptation to work on different types of gas without physically interfering with the equipment
  • significantly reduced device width compared to the previous version
  • complete system of safety measures
  • anti-legionella function
  • possibility of connecting the re-circulation of DHW
  • attractive design and relatively small dimensions
  • built-in adapter with measuring points with a diameter of 60/100mm
  • possibility of using a separate exhaust air/fuel system with a TWIN type air/gas separator
  • remote monitoring of the device’s operation by service personnel

SPECS

Thermal power (at temp. 80/60°C) 2,7-20,0 kW
Thermal power (at temp. 50/30°C) 3,0-22,0 kW
Heat load 2,8-20,4 kW
Seasonal space heating energy efficiency ηs 94 %
Efficiency of the boiler at nominal load and average
boiler water temperature of 70°C
97,6 %
Efficiency of the boiler at partial load
and return water temperature of 30°C
107,9 %
Seasonal space heating energy efficiency class A
Useful heat output at rated thermal power P4 (for modulated
boilers – arithmetic mean of min and max)
20,0 kW
Useful heat output at 30% of rated power P1 (for modulated
boilers – 30% of arithmetic mean)
6,0 kW
Efficiency η4 88 %
Efficiency η1 97 %
Max water pressure 3 bar
Max CH temperature 95 °C
Standard adjustable temperature 40-80 °C
Reduced adjustable temperature 25-55 °C
Pump head at 0 flow 0,7 bar
Nominal boiler thermal power (at temperature 80/60°C) 2,7-25 kW
Nominal heat load 2,8-25,6 kW
Efficiency of the boiler at nominal load and average boiler water temperature of 70°C 97,6 %
Water pressure 0,1-6 bar
Minimal water flow 2,7 dm³/min
Domestic water flow at Δt=30K 12,4 dm³/min
Energy efficiency class of water heating A
Load profile L
Range of water temperature regulation 30-60 °C
Sound power level LWA 44 dB
Emission of nitrogen dioxide 21 mg/kWh
Emission class of nitrogen dioxide (NOx) 6
Max. amount of condensate (natural gas) 2 l/h
Expansion vessel capacity 6 dm³
Standby mode power consumption PSB 0,005 kW
Electricity consumption at full load elmax 0,05 kW
Electricity consumption at partial load elmax 0,02 kW
Type and supply voltage ~ 230 ±10%/ 50Hz V
Protection degree IPX4D
Heating water and gas connection G3/4 inch
Dimensions 937x690x410 mm
Weight 65 kg
Domestic water connection G1/2 inch
Heat exchanger material stainless steel
Coil power 29 kW
Cylinder position vertical
Cylinder capacity 48 dm³
Coil capacity 4 dm³
Thermal power (at temp. 80/60°C) 3,9-24,0 kW
Thermal power (at temp. 50/30°C) 4,3-26,5 kW
Heat load 4,0-24,6 kW
Seasonal space heating energy efficiency ηs 94 %
Efficiency of the boiler at nominal load and average
boiler water temperature of 70°C
98 %
Efficiency of the boiler at partial load
and return water temperature of 30°C
108,7 %
Seasonal space heating energy efficiency class A
Useful heat output at rated thermal power P4 (for modulated
boilers – arithmetic mean of min and max)
24,0 kW
Useful heat output at 30% of rated power P1 (for modulated
boilers – 30% of arithmetic mean)
7,2 kW
Efficiency η4 87,9 %
Efficiency η1 96,9 %
Max water pressure 3 bar
Max CH temperature 95 °C
Standard adjustable temperature 40-80 °C
Reduced adjustable temperature 25-55 °C
Pump head at 0 flow 0,7 bar
Nominal boiler thermal power (at temperature 80/60°C) 3,9-30,0 kW
Nominal heat load 4,0-30,7 kW
Efficiency of the boiler at nominal load and average boiler water temperature of 70°C 98 %
Water pressure 0,1-6 bar
Minimal water flow 2,7 dm³/min
Domestic water flow at Δt=30K 13,1 dm³/min
Energy efficiency class of water heating A
Load profile XL
Range of water temperature regulation 30-60 °C
Sound power level LWA 46 dB
Emission of nitrogen dioxide 24 mg/kWh
Emission class of nitrogen dioxide (NOx) 6
Max. amount of condensate (natural gas) 2,8 l/h
Expansion vessel capacity 6 dm³
Standby mode power consumption PSB 0,005 kW
Electricity consumption at full load elmax 0,05 kW
Electricity consumption at partial load elmax 0,02 kW
Type and supply voltage ~ 230 ±10%/ 50Hz V
Protection degree IPX4D
Heating water and gas connection G3/4 inch
Dimensions 937x690x410 mm
Weight 67 kg
Domestic water connection G1/2 inch
Exchanger material stainless steel
Coil power 29 kW
Cylinder position vertical
Cylinder capacity 48 dm³
Coil capacity 4 dm³

The mobile App Comfort Version and the mobile app Service Version diagram show just how easy it is for you to connect to and control your boiler and heating system, monitor the operation of the boiler against the service parameters and diagnose any error codes.

Get it Now!

Your Ecocondens Integra II Plus boiler is just a couple of clicks away!